Microwave Sparking – Solution

Microwave Oven Parts

Sincerely from the microwave

Sparking from your microwave oven is a legitimate cause for concern. It indicates a serious defect in some part of the appliance. However, sparking can also be caused by improper use of the appliance.
When such a problem occurs, you should unplug the microwave oven from the power supply and call a professional technician. This way, you will protect your home from more serious consequences.
Sparking from the microwave oven can be prevented if you follow the instructions for use. The most important requirement when heating dishes is not to use metal objects or dishes. It is precisely contact with such coatings that leads to the appearance of such a problem with the appliance.
Here are some of the main reasons for sparking from the microwave oven:

Only using non-metallic cookware ensures your safety and a longer life for the appliance. However, other causes of sparking from the microwave oven are much more unpleasant and you should use the services of a professional.
When you heat more food in the appliance and use larger dishes, grease settles inside. And the contact of the dishes with the hob and walls leads to scratches.
Over time, the enamel on the inside of the microwave oven begins to break down, which is one of the main reasons for sparking. Incidentally, improper cleaning and maintenance of the appliance also leads to this unpleasant problem.
When you decide to remove food buildup inside, you should be careful not to scratch the coating of the plate and walls. Grease and food buildup on the inside of the oven also have a detrimental effect on its quality performance. You should clean the walls and plate of the appliance in a timely manner to prevent unwanted damage that could endanger the safety of your home.
This fully applies to the operation of the waveguides in the microwave oven. The layer of fat inside the appliance adversely affects their operation. At some point, food residues can ignite when you decide to heat your dish.
Last but not least, the peeling of the mica inside the microwave oven leads to unpleasant sparking. The reason for its wear can be due to both improper use of the appliance and the use of metal containers to heat dishes. The mica is metallic and is usually located in the right corner and can be removed without tools, but its coating must be  It is not peeled off because it interacts with the oven magnetron during operation. The fix is to buy new mica, they are usually of standard sizes, and before installing, clean the place where it will lie, if there is sparking on the paint and it is exposed, you must clean it with alcohol and paint it with a small brush, because otherwise, even if you install the new mica, it will have the same sparking. Do not allow unwanted sparking from the microwave oven.