In the hectic everyday life we live in, we always want everything to be cozy and tidy when we get home. In this article we will tell you how to install a washing machine yourself and what the steps are. When you find a defect in the old appliance that is no longer very profitable for us to repair or we have to wait a long time for parts to be delivered, you undertake the purchase of a new appliance. This is something annoying for anyone living in a big city and it is all about time and a waste of nerves, but it is inevitable if we want to always be clean and tidy. If you have had the misfortune of having to replace your appliance, you can organize the steps for buying and installing the new appliance until you dispose of the old one yourself.
- Choose a brand of appliance and order it with the option of delivery to your door. Almost every chain delivers to your door. Don't rush to disconnect the old appliance before the new one arrives. There are several reasons for this.
-I'll take your seat.
-If the water tap doesn't hold, it will leak because there won't be a hose screwed on -The hose for the dirty drain will emit a bad smell
2. After the new appliance is delivered, position and unpack it at the location where you will install it.
3. Only now can you dismantle the old appliance and push it aside for the time being.
4. Preparation for installation of the new appliance is to inspect it for transport stickers, studs under the washing machine that must be removed because the appliance will bounce if they are not removed, and most importantly, to remove the TRANSPORT BOLTS.
5. For each appliance, the transport bolts are in the same places as indicated in the picture above. You just need to read the instructions that come with the appliance and it is indicated there where exactly they are located. The transport bolts can be 3,5,6 in number. This is the most important thing that you need to remove during installation. If they are not removed, they will keep the drum fixed during operation and after 1 spin with a load of clothes, the plastic casing that is fixed with the bolts will break and all the water will flow out onto the ground. Warranty services do not recognize this type of warranty even if the appliance was purchased on the same day. Installation is carried out by a person who is not aware of it and the fault must be borne by the person who did the installation.
6. Remove the old unit and place the new one in its place. Connect the clean and dirty water hoses.
7. After connecting the hoses, we level the washing machine, run a short 20-minute program, empty for example, to wash the drum of technological oil. Then we call a company to come and pick up the old appliance. There are quite a few such companies in Bulgaria, even companies such as secondary waste offer to come to the place to pick up such type of equipment.
