Why is the dishwasher not draining water?
The dishwasher is one of the most technically complex appliances. However, it is becoming increasingly popular among modern consumers, mainly due to its convenience and compactness. But like any household appliance, the dishwasher also breaks down over time.
One of the most common defects of the machine is the inability to drain water. This is especially unpleasant for every housewife. The damage can be detected after the end of the operating cycle of the appliance. The water collects in the lower part of the machine, but never drains into the drain hose.
There are several main reasons for the occurrence of this problem.
For this reason, it is important that the dishwasher is installed by a professional technician. He will be the one who will guarantee the trouble-free operation of the machine.
The problem may lie in the filter being clogged with pieces of waste – most often, stones fall into it and block the pump for pumping, or if you broke a glass, glass has fallen into the pump. In addition, the hose to the sewer should also be inspected, if there are any blockages there.
If you find a defect in the appliance, reset it to change the program. Dishwashers are programmed to start by pumping and if you hear the pump running, it means there is a blockage. IF YOU HEAR A LIGHT HUZZING SOMETHING HAS BLOCKED THE PUMP.
- If the pump can be heard turning but does not pump out water, there is probably a blockage in the hose. The most common problem is a clogged siphon under the sink. If the dirty drain on the dishwasher is coming out into the siphon, the siphon is clogged.
- If you hear a humming sound and the pump does not turn, you need to remove the drain pump and see what is blocking it.
- It is very rare for a hose to be kinked and the water to not be discharged into the drain.
All of these problems can be identified by you or a specialist, just follow the steps above. The other reasons for the inability of the appliance to pump water are much more serious.
Damage to some of the main components of the machine (computer) is also among the frequent reasons for its poor performance. There is a rare case of a broken cable in the door, in fact it cannot supply voltage to the pump and thus it does not work. Due to the fact that in all dishwashers the wiring harness passes down the door, you should not turn it off as an option. If you are sure that the inability of the appliance to pump water is not due to blockage or stuck solid particles, then diagnostics of some of the main elements of the dishwasher should be performed.
Another problem could be a failure in the control module. In fact, this is one of the most important components of the dishwasher. The bad news is that the control module is a little more expensive than the other components BUT IN ACCOUNT OF THIS, THEY ARE REPAIRED SUCCESSFULLY.
The last three problems, leading to the inability to pump water out of the machine, you can research and come to a solution yourself.
