How to put a belt on a washing machine
If your washing machine's drum isn't spinning properly or is showing other problems that are affecting its performance, it may be time to replace the belt. It can also come off when the machine is overloaded.
If it continues to show a similar problem in the future, then the cause is a disassembled pulley. A dropped belt is common in washing machines that are more than 20 years old. Keep in mind that this problem is not uncommon.
Over time, the belt begins to wear out. When the drum is functioning properly, the cause of the problems with the washing machine should be sought in the elastic band. In new machines, the belt is put on by hand, without tensioning the motor.
The motor remains fixed, and the belt is elastic. But with older models this is not the case. With them there is an option to tighten the motor. The explanation is very simple – the belt is not elastic. This applies to most types of old washing machines that were made before 2007.
However, installing the belt on newer machines doesn't take that much time and effort. You can do it in less than an hour. The belt seems like a relatively small and insignificant part, but without it, the machine starts to show signs of damage.
It helps the drum spin better. Without it, the laundry cannot be washed. Although installing the belt does not seem like such a difficult task, it is best to consult a professional. This way you will protect the machine from unwanted damage.
To perform such a repair, some technical knowledge is also required. You need to know the details of the washing machine's structure. When installing the belt, part of the machine is disassembled.
Using the services of a specialist will guarantee you the effectiveness of the repair, as well as the future trouble-free operation of the washing machine. What to do if the belt needs to be replaced on the machine:
Make sure that's the problem. |
Consult a specialist |
elektri4ko.com |
