How to install an electric water heater
Some would say that installing an electric water heater puts an end to a long-planned renovation. Even if you are not moving into a new home, but just want to replace your old water heater, its installation is an important condition for ensuring comfort.
But not everyone would undertake such a task. The explanation is very simple – installing a water heater requires technical knowledge, which requires more detailed knowledge of the electrical network than installing any other household appliance.
The replacement itself carries certain risks. The water heater is connected to three-phase current, and most people are afraid of handling the cables of the electrical network. For this purpose, it is necessary to contact a professional who has proven experience in installing water heaters.
There are some more basic things to consider before starting to install the appliance. The better option is to buy a water heater of the same type and brand as the previous one.
This way you won't have to drill holes in the walls if the plate is different. Another important point is related to changing the soft connections. Don't forget to reset the water heater if it doesn't have a 3-wire installation.
It is mandatory to drain the water from the old appliance and stop the water supply to it. The specialist who installs the new boiler must secure it in the best possible way. This will ensure greater safety during its use.
You don't want the worst case scenario to happen, namely the water heater falling over when it fills with water. Many users prefer their hot water heater to be installed in a certain way.
But most water heater models are designed for a specific type of installation. Hot water devices are mainly divided into two types when it comes to how they are installed in the wet room: vertical and horizontal.
There is another type of water heater that is not instantaneous. These are placed under the sink cabinets in kitchens. They are extremely convenient when you do not have access to hot water in the dining room.
Such water heaters are much easier to install, as there is no need to connect them to three-phase current. However, always use the services of a professional technician. With his services, you do not expose yourself or your home to danger in the event of an unwanted damage to the water heater.
Do not forget that poor-quality connection of the hot water device, as well as its improper maintenance, is also life-threatening. How to install an electric water heater:
Look for a similar type and brand of appliance |
Use the services of a technician |
Before installation, drain the water and disconnect from the power supply. |
