How to replace a washing machine shock absorber
Find: Damper for Washing Machines
When your washing machine starts making too much noise, it may be time to consider replacing the shock absorber. Damage to this part leads to a significant deterioration in the machine's functions.
The good news is that you can do the job yourself, even at home. However, it is essential to first seek the advice of an experienced technician. With their help, the specific reason for the poor performance of the washing machine will be determined.
Only a professional can confirm that your machine needs a new damper. By using the services of a professional, you will ensure the higher efficiency of your washing machine in the future.
To replace a shock absorber, the first important thing is to get a new part. You need to check if it is designed specifically for your machine. Then proceed with the replacement.
Before you start disassembling the individual elements of the washing machine, disconnect it from the power supply. In addition, turn off the water taps connected to it. Remove the top of the appliance. Pull out the detergent compartment.
Remove the door seal, then tilt the machine back. Remove the front panel. This will make it easier to reach the damaged damper and remove it.
Gradually remove the screws, clips and pins that hold it to the washing machine. Compare the new damper with the one you removed. Make sure they are the same size and type. You can then attach the new damper by going through the steps again to attach it to the machine frame.
It doesn't sound that difficult, but always keep one thing in mind. Such an important part of the washing machine can only be replaced with the help of a professional technician. To perform such a repair, you will need tools such as a wrench, screwdriver, etc.
Here's how to dismantle a washing machine shock absorber:
Remove the top of the machine |
Remove the shock absorber pins. It is held on top and bottom. It may also be bolted on. |
Tilt the machine back |
Remove the old part and replace it with a new one |
