Problem with the coffee machine – it doesn't dispense water
Most home coffee makers need to be well maintained to prevent
unwanted damage. However, many users continue to encounter the same
same problems when working with these devices.
The machines are filled daily with coffee beans, cocoa powder, milk and water. And with so much
many nozzles, filters and pumps that need to be cleaned, over time they start
mechanical damage or problems with the functioning of the devices may occur.
The last thing anyone wants at the start of the day is for their coffee machine to
stop functioning. This will not be surprising if you have previously noticed the signals,
which the device "gives" a problem with its operation.

One of the unpleasant consequences of poor coffee machine maintenance is that it stops working.
water is running. A possible reason for this is a problem with the strainer. It builds up and this leads to
the inability for water to drain from the head.
A more unpleasant reason could be a possible pump failure. If it is not getting air
and is not loaded correctly, then the machine will not dispense water. For this purpose, you must
you are only pumping out a small amount of the liquid that is in the tank.
In such cases, you may also need to use measured force. Lightly tapping the
tank on the machine would be a good solution. This way you will get the air out
from inside the appliance. And that would make the pump work again.

To ensure the machine's efficiency, clean it thoroughly in the evening with
special preparations. But not all of them are intended specifically for this type of appliance. Some
of the preparations enter the machine head.
This subsequently prevents the water from draining properly. Not only that, but there is a danger of
also get into the coffee cup. This is why the machine does not dispense water:
Poor maintenance
Pump failure
Strainer problem