Why is the dryer not heating?
There are several problems with the dryer that require the intervention of a specialist. One of them is the inability to heat. By the way, the dryers offered on the market are mostly of two types. The first of them is with a heat pump, and the other is with a heater.
The main difference between them is in the principle of drying. Heat pump machines work with freon. Each type has its positive and negative sides. On the one hand, dryers with a heater are much stronger and harder to break down.
At the same time, heat pump dryers are far more economical. But when there is a freon leak, then repairing this type of dryer becomes an overwhelming task. The repair will cost you quite a lot if such a problem occurs. How does this damage occur? The solders in the machine, which are in the water, break down. This leads to the release of freon. This prevents the machine from heating up during operation and the clothes do not dry.
For this reason, most experts advise that if you are buying a dryer, it is better to get one with a heater. A heat pump is several times more expensive than a reotan. When the heating element fails, fixing the problem with machines with a heater will cost you significantly less in repairs.
All professional devices, however, work with a rheotan heater, maintaining the desired temperature. The role of the heater is key when higher degrees of the working cycle need to be reached. Most people think that the heating element is not particularly gentle on clothes. This is far from the case.
Here are the main reasons why the appliance does not heat up:
Dryer with heater | Heat pump dryer |
Damage to the heating element | Freon leak |
Defect in the protection or thermostat of the clicker | Compressor problem |
Each machine has settings that are specific to the appliance. You can always set a program where the operating temperature is not so high. Most retailers are reluctant to admit to their customers that machines with a heater are much more reliable and efficient than dryers with a heat pump, and therefore they encourage the customer to buy one with a heat pump.
In home appliance stores, they may tell you the second type, as the most modern, innovative and reliable. But the truth is completely different. In dryers with a heater, the protection is often turned off. If the machine does not heat up and stops blowing clothes, what you need to do is remove the back cover and fix the problem yourself by pressing the latches down and it will restore the circuit that has been interrupted for some reason. The protection in this type of dryer with a heater is deactivated by pressing a button located on the back of the appliance.
As for heat pump machines – they do not have a similar function. In fact, these types of machines show much more serious damage if there is a freon leak or a defect in the compressor.
There is an opinion among users that if the machine is unable to dry, the reason lies in the pump, due to the inability of the water to reach the tank of the appliance. However, the problem with dryers that do not put water into the tank and , which do not heat, is in the broken heat pump system and its inability to condense the liquid.
When choosing a dryer, you should know that the maintenance of appliances with a heater is much easier than those with a heat pump. Quality maintenance can only be performed by a proven home appliance service center.
Профилактика на сушилня с термопомпа .
